Chiller Tubes and Its Cleaning


Chiller is a big capital investment and is the largest energy user. It is a machine which removes heat from the liquid and that liquid will be then circulated through a heat exchanger to cool the equipment and thereby increases its efficiency. This is a sizeable investment and thus its maintenance is equally essential. Chiller is nothing without chiller tubes which is crucial part of the same.
Why chiller tubes are used?
A chiller tube is primarily used on chilled water applications. The main job of a chiller tube is transferring the heat so as to make the chiller works. Without this component, the chiller will be not able to operate and is pretty useless. Chiller tubes are extremely important and so does its cleaning. The tubes are the main part for cleaning otherwise the air insides the same get contaminated and hence hinders the performance of the chiller and will make it useless after some days.
These tubes can be cleaned by using number of machines and couple of them is described here for the reader’s sake of convenience.
Chiller Tubes Cleaning Machines
Chiller Tube Cleaner
This is the fourth generation chiller tube cleaning machine with some advanced features. Unlike the previous third and second generation models, this machine makes cleaning as the one person operation as it can be done very easily and even a single person can handle the same. It is good to know that chiller tube cleaner are ideal for the situations where in – depth cleaning is required. It comprises the flexible hose that can easily bend inside the tubes without losing pressure. This tools and components of this machine are so designed that it would not harm the chiller tubes and provides deep and perfect cleaning of the same.
Automatic Chiller Tube Cleaner
Gone are the days when manual cleaning is the only option to clean chiller tubes as now is the time auto tube cleaning system for chillers is readily available. As the name implies, this is quite an automatic tube cleaning machine which cleans the chiller tube approx four times faster than the manual procedure. It consists of speed fan guns that flushes out of all the deposits and cleans the tube to its perfection. This not only saves the time and effort of an individual that is required while chiller tube cleaning but also cleans the tube much better than usual.
Chiller tubes maintenance is very essential so as to optimize efficiency and to extend the life of the equipment. There is no second opinion that cleaning chiller tubes is a backbreaking task but it is also true that it would enhance the efficiency of this huge capital investment. It takes time but trust me it’s really worth.

Comments

Post a Comment

Popular posts from this blog

How Hazardous the use of Chemicals is for the Chiller & the Cooling tower?

Cooling towers use evaporation of water to remove excess heat and cool the working fluid. Cooling towers provide low water temperature with air-cooling or another dry rejection device. It is not only cost effective but an energy efficient system for cooling. There are many types of cooling towers like counter flow, cross flow and hyperbolic. A chiller is normally a machine that helps to remove heat from the liquid through absorption or vapor compression. The liquid normally circulates through the heat to cool the particular equipment. Chillers and cooling towers are rated on the basis of the range and approach. This also depends on different types of temperature. There are many hazardous chemicals that are used in chillers and cooling towers. Cooling tower uses Acid that can lead to oxidization or scaling. The sulfuric acid introduces sulfate ions (SO4-2) to the normal water. Eventually, this may also lead to calcium sulfat...
Read more

Automatic Tube Cleaning System –Boost Your HVAC Efficiency at Minimal Costs

Most of the times, scaling and micro-fouling are regarded as major problems in the condenser tubes & heat exchangers. This tends to be ultimately lowering the overall system performance, output, and service life of the given system. The utilization of the advanced ATCS-HVAC systems thus stands vital –not only for ensuring comfort cooling in commercial or residential buildings, but also for ensuring top-class efficiency in a wide range of industrial applications including chip manufacturing, cold storage, and so more. The only problem that might occur is during the utilization of recycled water in the open cooling tower system. For overcoming such a situation, the automatic brushing system gets installed that helps in setting up a continuous, automatic cleaning process in motion. An advanced ATCS-HVAC system helps in bringing a permanent solution for intense fouling in the industrial chiller heat exchangers & condenser tubes. The ATCS ( Automatic Tube Cleaning Systems) are k...
Read more

Bring About Top-Notch Hotel Energy Efficiency with ATCS

Ever wondered what those big noisy boys (usually found in the basement area) meant for? These are the units that could run up your overall electricity bill up to 70 percent when you are running a hotel. These are the chiller units and these are used for generating cold water (4 to 7 Degree Celsius) that gets circulated to the guests & function rooms in the hotel building. These chiller units are used for cooling down the spaces as per the required comforting temperature in any hotel building. The cooling system of your hotel building is made out of the same component like any refrigerant. The refrigerant gets evaporated in the evaporator and heat gets absorbed. This evaporated heat then condenses in the condenser unit & helps in releasing heat from the hotel building & different units. The condenser unit needs to be cooled, probably brought about by water that keeps circulating over the cooling tower. Over the passage of time, mineral deposits & pollutants fro...
Read more