Effective Tips on How to Care and Maintain an Industrial Chiller


Industrial chillers can be explained as a device which cools a process fluid or helps in the dehumidifying air in industrial and commercial facilities. This can be said to be a capital investment. Many establishments state chiller as the biggest energy user,and thus, it requires to be properly maintained so that it always stays in good condition and continues working efficiently.
Unit design and controls, and refrigerants of the chiller have improved significantly leading to the higher efficiency of chillers. In spite of these advancements, checkup service and proper maintenance of chillers are very crucial for the efficient and continued working of them.
Effective Tips on How to Care and Maintain an Industrial Chiller
To ensure the quality of service of chillers, some points are to be kept in mind regarding their maintenance and care. Here are some important tips and advicegave below on how to maintain and take care of them:
·         Make use of operating log: Maintenance of chillers are not once in a month kind of work. You need to document the performance of chillers on a daily basis. You need to regularly compare its performance to detect any problem or issue at its earliest before that problem starts to grow. Operating logs helps the operator in listing down a history of conditions to check and analyse later on for any occurring trends. Logs warn the operator of any operating problems.
·         Maintenance of clean tube: Efficiency of chiller heat transfer directly affects the performance of chillers. If a unit is unable to transfer heat, its effect will be on the overall performance of the chiller. This problem can be avoided by regularly cleaning the evaporator tubes and the unit's condenser. Various chiller condenser tube cleaning equipment is available for the purpose of condenser tube cleaning.
·         Maintenance of water treatment: Issues such as corroding and scaling can be avoided just by treating water properly as the chillers use water for transferring heat efficiently.
·         Analyse refrigerant and oil: Chemical analysis of oil and refrigerant are important to ensure the performance of chiller. This process detects contamination issues and should be done on a yearly basis. Basically, this service is offered by the chiller manufacturers to their products.
So keep in mind all the above-mentioned points as these are very important for taking care and maintaining industrial chillers. These are a one-time investment,and no company can afford to lose such an asset just because of carelessness.Make sure that your chiller tube cleaning machine is kept in the perfect condition.


Comments

Post a Comment

Popular posts from this blog

How Hazardous the use of Chemicals is for the Chiller & the Cooling tower?

Cooling towers use evaporation of water to remove excess heat and cool the working fluid. Cooling towers provide low water temperature with air-cooling or another dry rejection device. It is not only cost effective but an energy efficient system for cooling. There are many types of cooling towers like counter flow, cross flow and hyperbolic. A chiller is normally a machine that helps to remove heat from the liquid through absorption or vapor compression. The liquid normally circulates through the heat to cool the particular equipment. Chillers and cooling towers are rated on the basis of the range and approach. This also depends on different types of temperature. There are many hazardous chemicals that are used in chillers and cooling towers. Cooling tower uses Acid that can lead to oxidization or scaling. The sulfuric acid introduces sulfate ions (SO4-2) to the normal water. Eventually, this may also lead to calcium sulfat...
Read more

Automatic Tube Cleaning System –Boost Your HVAC Efficiency at Minimal Costs

Most of the times, scaling and micro-fouling are regarded as major problems in the condenser tubes & heat exchangers. This tends to be ultimately lowering the overall system performance, output, and service life of the given system. The utilization of the advanced ATCS-HVAC systems thus stands vital –not only for ensuring comfort cooling in commercial or residential buildings, but also for ensuring top-class efficiency in a wide range of industrial applications including chip manufacturing, cold storage, and so more. The only problem that might occur is during the utilization of recycled water in the open cooling tower system. For overcoming such a situation, the automatic brushing system gets installed that helps in setting up a continuous, automatic cleaning process in motion. An advanced ATCS-HVAC system helps in bringing a permanent solution for intense fouling in the industrial chiller heat exchangers & condenser tubes. The ATCS ( Automatic Tube Cleaning Systems) are k...
Read more

Bring About Top-Notch Hotel Energy Efficiency with ATCS

Ever wondered what those big noisy boys (usually found in the basement area) meant for? These are the units that could run up your overall electricity bill up to 70 percent when you are running a hotel. These are the chiller units and these are used for generating cold water (4 to 7 Degree Celsius) that gets circulated to the guests & function rooms in the hotel building. These chiller units are used for cooling down the spaces as per the required comforting temperature in any hotel building. The cooling system of your hotel building is made out of the same component like any refrigerant. The refrigerant gets evaporated in the evaporator and heat gets absorbed. This evaporated heat then condenses in the condenser unit & helps in releasing heat from the hotel building & different units. The condenser unit needs to be cooled, probably brought about by water that keeps circulating over the cooling tower. Over the passage of time, mineral deposits & pollutants fro...
Read more